Guiding Scale-up of Sustainable Technologies

an interview with Michael Schultz published first at Proofing Future: Bridging People + Ideas on 15 Aug 2022

“I help companies navigate the bumpy road of scale-up, providing process development services to validate key technical concepts, optimize the right parameters, and derisk the technology. I also enjoy working with clients to build capability. Going beyond producing deliverables, I view a project as a success, if I can transfer my knowledge and learnings so that I am finally no longer needed,” says Dr. Michael Schultz, Principal at PTI Global Solutions.

Dr. Michael Schultz enjoys the challenge of solving difficult engineering problems to reduce carbon footprint and to deliver economic value. As Managing Director of PTI Global Solutions, Michael works with companies in the sustainable technology space to help accelerate commercialization, reduce risk, and get the greatest value from these great ideas. 

Previously, Michael held positions at LanzaTech, Battelle Science and Technology Malaysia, and UOP, leading process R&D and scale-up across a broad range of chemical and biological technology areas.  Michael holds a B.S. in Chemical Engineering from the University of Michigan and a Ph.D. in Chemical Engineering from the University of Massachusetts.  He received the 2015 EPA Greener Synthetic Pathway award from the US EPA and the 2005 Haden Freeman Award for Engineering Excellence from IChemE.  Mike has been granted more than 45 US Patents in his career.

Sign up to meet Michael Schultz on August 25 to discuss “Financial Instruments for Scale-up of Sustainable Technologies”

Contact Michael Schultz with your interest in Scale-up of Sustainable Technologies.

Sebastian Klemm: You recently presented “Practical Guidelines for Scale-up of Sustainable Technologies” at the Process Development Symposium in Philadelphia. What are the cornerstones of these guiding principles of yours?

Michael Schultz: The challenges with scale-up of sustainable technology are to effectively reduce the time, cost and risk of scale-up. These are often competing objectives.

Typically, the scale-up timeline is the most critical of these. Often we must accept some risk to move quickly. The key is to understand risks, mitigate where possible, perhaps with some strategic overdesign and investing in R&D at all stages of scale-up.

To effectively move quickly while managing risk, we need creative engineering, effective experimental programs with critical data gathering at each stage, and useful modeling efforts. 

Sebastian Klemm: How can you concretely support companies through scale-up challenges of new products & process technologies?

Michael Schultz: I help companies navigate the bumpy road of scale-up, providing process development services to validate key technical concepts, optimize the right parameters, and derisk the technology.

I am currently working with a company producing a novel polymer additive as they look to scale-up their technology. Having proven product manufacture at the lab scale, I am working with them to define and build their process technology at larger scales.

I also help clients better assess and understand their technology, by providing an internal engineering review of their technology, and guiding the team in a scale-up risk assessment. 

I also enjoy working with clients to build capability. Going beyond producing deliverables, I view a project as a success, if I can transfer my knowledge and learnings so that I am finally no longer needed! 

Click to visit the PTI Global Solutions website

Sebastian Klemm: How do you think the Inflation Reduction Act just passed in the U.S. can help turn the tide in favor of investing in sustainable technologies and clean energy solutions?

Michael Schultz: The Inflation Reduction Act[1] provides a number of financial mechanisms to stimulate further adoption of clean energy and sustainable technology in the United States.

The IRA is a predominately technology neutral approach, providing incentives across sectors such as power (wind, solar, nuclear), electric vehicles, transportation fuels, clean hydrogen, buildings and households. The IRA also provides much greater incentives for US manufactured content and prevailing wage requirements, providing a mechanism for US based manufacturing jobs to support this growth in clean energy.

Sebastian Klemm: Could you elaborate on how the scale-up of sustainable technologies interfaces with financial instruments?

Michael Schultz: The most successful sustainable technology scale-up efforts rely on many financial instruments to support scale-up and commercialization.

This can include grants from various public and private sources, joint development partnerships, venture capital funding, and for larger, first of its kind demonstration or commercial projects, specialized loan programs to support project capital investment.

In the past, I have provided technical due diligence support for various organizations making financial transactions in sustainable technology. This has included the US Department of Energy – reviewing applications for funding to support pilot and demonstration projects for the production of next generation biofuels, the US National Science Foundation – evaluating applications for early stage projects for sustainable chemicals, and a Special Purpose Acquisition Company (SPAC) who was pursuing an acquisition of a commercial, or nearly commercial stage company in the sustainable technology space.

I am currently working with an early stage company with a novel technology for producing petrochemical alternatives from renewable feedstocks. I am helping them develop a process design for a pilot plant, and using this as a basis to estimate a preliminary, order of magnitude capital cost. This cost estimate will enable my client to plan and evaluate options to determine the best approach for financing for this project.

For each of these assignments it has been critical for me to assess the state of the technology in question, review technical and financial projections, and provide an assessment of any technical risk that should be taken under consideration.

Sebastian Klemm: You just recently completed a book chapter themed “Process Scale-up for Bioproducts: Enabling the Emerging Circular Economy”. Which particularities and crunch points do you address?

Michael Schultz: This chapter addresses the emergence of fuel, chemical, and food products produced from biobased feedstocks, using biobased catalysis and a combination of both of these elements. Similarities and differences in the scale-up of bioproducts compared to the scale-up of more conventional thermochemical processes using petroleum-based feedstocks will be presented, along with a case study and commercial success stories for the scale-up of bioproducts.

We see opportunities to contribute to a circular economy by producing products from renewable feedstocks and waste carbon. Challenges associated with the scale-up of bioproducts include:

• the availability of feedstock

• the lack of established data and a knowledge base for these new technologies

• new optimization criteria that include metrics such as carbon intensity and other environmental, social, and governance (ESG) factors

However, with recent success stories such as the growth in drop-in, bio-based transportation fuels such as Sustainable Aviation Fuels (SAF) and renewable diesel, new bioproducts such as polylactic acid (PLA) and bio-based replacements of conventional petrochemicals such as  1,4 butanediol and 1,3 propanediol (precursors to many polymers and other materials we use every day), the future is bright for continued growth in bioproducts.

For instance, the European Bioplastics Organization estimates that the global production of bioplastics will increase from 2.4 million tons in 2021 to 7.5 million tons by 2026.[2] Production of bio-based transportation fuels[3] such as biodiesel, renewable diesel, ethanol, and Sustainable Aviation Fuel (SAF)[4] is expected to increase as well in the coming years.

Sign up to meet Dr. Michael Schultz on August 25 to discuss “Financial Instruments for Scale-up of Sustainable Technologies”

Contact Dr. Michael Schultz with your interest in Scale-up of Sustainable Technologies..

References

↑1https://en.wikipedia.org/wiki/Inflation_Reduction_Act_of_2022↑

2https://www.european-bioplastics.org/global-bioplastics-production-will-more-than-triple-within-the-next-five-years/↑

3https://www.iea.org/data-and-statistics/charts/global-biofuel-production-in-2019-and-forecast-to-2025↑

4https://www.icao.int/environmental-protection/pages/SAF.aspx

Sustainable Fuels – an interview with Dr. Michael Schultz

Sustainable Fuels – an interview with Dr. Michael Schultz

published first at Proofing Future: Bridging People + Ideas on 5 May 2022

“I don’t think that market forces alone will do the trick. I don’t think we have a chance to meet the aggressive climate targets, if we continue to dump a pollutant, CO2, into the atmosphere without any economic penalty as we can never compete with the status quo,” says Dr. Michael Schultz, Principal at PTI Global Solutions.

Dr. Michael Schultz enjoys the challenge of solving difficult engineering problems to reduce carbon footprint and deliver economic value. As Managing Director of PTI Global Solutions, Michael works with companies in the sustainable technology space to help accelerate commercialization, reduce risk, and get the greatest value from these great ideas. 

Previously, Michael held positions at LanzaTech, Battelle Science and Technology Malaysia, and UOP, leading process R&D and scaleup across a broad range of chemical and biological technology areas.  Michael holds a B.S. in Chemical Engineering from the University of Michigan and a Ph.D. in Chemical Engineering from the University of Massachusetts.  He received the 2015 EPA Greener Synthetic Pathway award from the US EPA and the 2005 Haden Freeman Award for Engineering Excellence from IChemE.  Mike has been granted more than 45 US Patents in his career.

Contact Dr. Michael Schultz with your professional interest in Sustainable Fuels.

Register here for “Paths to Sustainable Fuels” synergy event with Dr. Michael Schultz on 31 May.

Sebastian Klemm: What is your mission with PTI Global Solutions, and how do you achieve it?

Michael Schultz: PTI Global Solutions helps companies in the sustainable technology space reduce carbon and create value by maximizing return from their best ideas, reduce the time and cost required to commercialize, and accelerate the deployment of technology to the marketplace.

I bring my experience from more than 20 years in industry, where I have had the chance to scaleup a number of new products and process technologies, helping companies work through scale up challenges.  My ultimate goal is to help these companies build this capability, rather than simply issuing reports, deliverables.                                           

Sebastian Klemm: The form of energy in any given period determines the relationship between people and nature to the extent that its production affects human habitat.[1]

Alternative fuels however need to be explored within the water-energy-food nexus – the interrelated nature of our global resource systems – as water security, energy security and food security are inextricably linked and actions in one these areas often impact one or both of the others.[2]

Why are there no easy answers to sustainable fuels? What are the challenges? 

Michael Schultz: One challenge is scale. The sheer quantities of fuel consumed every day are massive. On a global basis, we currently consume 100 million barrels of oil a day, about 4 billion gallons, or 16 billion liters.[3] It will take trillions of dollars in capital to replace the current infrastructure with infrastructure to produce sustainable fuels. To further illustrate the scale challenge, a world scale refinery such as the Reliance refinery in Jamnigar consumes 1.2 million barrels of oil a day, a scale more than 50x the largest corn ethanol plant.[4]

The second challenge is compatibility. Our transportation infrastructure is largely built around liquid fuels, with engines that have been designed for petroleum based refinery fractions.  Introduction of new, sustainable fuels, such as ethanol for gasoline engines, renewable diesel, or sustainable aviation fuel (SAF), requires extensive testing to insure compatibility with existing engines.  I believe that over time we will see custom engines designed for these sustainable fuels, but that will take time.

A third challenge is feedstock. As noted above we consume 100 million barrels of oil a day.  Feedstocks for sustainable fuels range from waste industrial gases, used cooking oil, waste biomass, and purpose grown vegetable oils. We need similar, low cost quantities of these alternative feedstocks to meet existing transportation fuel demand with alternative, sustainable liquid fuels.

It should be noted that electric vehicles solves many of these challenges. I believe we need acceleration of both pathways—broad electrification of the transportation infrastructure and sustainable, drop-in transportation fuels to have the greatest impact on CO2 reduction. 

Visit the PTI Global Solutions website

Sebastian Klemm: The fuel market has long been dominated almost exclusively by mineral oil, meaning fossil fuel extraction from the ground which when burned emits additional carbon into the atmosphere.

In Germany, the German Energy Agency dena – that acts at the interface between politics and industry – advocates the use of alternative fuels to change this situation and to reduce emissions.[5] Sustainable fuels that can substitute fossil fuel may be grouped into synthetic fuels [6] and biofuels [7].

With your expertise you enable scale-up & commercialization of low carbon energy and sustainable fuels [8]. Considering available quantities of solid municipal waste and land use required for biofuels next to space for wildlife & space for a growing global population:

What does the scalability of sythetic fuels and biofuels depend on? 

Michael Schultz: We can think about scalability for three areas. 1) Feedstock collection, distribution and processing. Whether we are collecting biomass or municipal waste, industrial off-gases, or used cooking oil or vegetable oils, each brings its own logistic challenges. The feedstock then must be conditioned for use in the process. This may involve size reduction of biomass or municipal waste (grinding or shredding the feedstock to reduce the particle size), limited cleaning of industrial gases to reduce impurities, or purification of cooking/vegetable oil to remove impurities that can damage catalyst. There are systems level scalability challenges (how to get X number of trucks per day on site delivering municipal waste) and technical challenges (how to selectivity purify the feedstock to optimize cost and performance).

2) Feedstock conversion and product purification. Scaling the feedstock conversion to a hydrocarbon liquid fuel then can involve new processing units, e.g. novel gas fermentation technology to convert industrial waste gas, and modifying existing technology and going much larger in scale, e.g. adapting existing gasification technology to produce synthesis gas for synfuel production.

3) Product distribution, after all, brings its own scalability challenges. For instance, in the US ethanol is typically blended close to the final destination. As a result a robust infrastructure has developed to enable this. 

Sebastian Klemm: What potentials of sustainable fuels have you been able to leverage in specific projects?

Michael Schultz: I have been fortunate to work on a number of projects to scale up and commercialize sustainable fuels.

In my role at LanzaTech we were successful in the scaleup of the production of sustainable ethanol from waste industrial gases, used as a gasoline blending component, and secured the first commercial projects for this technology. We also worked closely with Pacific Northwest National Lab to develop and scale the first technology for production of sustainable aviation fuel from ethanol.

As a consultant I have worked with clients on project development for sustainable aviation fuel, and technology evaluation for production of renewable diesel. 

Sebastian Klemm: The aviation industry has become a fixture of global transport as well as global emissions. While mobility may be perceived as a social good and integral to a global economy paradigm. The pollutants that trail movement by flight – carbon dioxide, nitrogen oxides, water vapor in contrails, black carbon – are not. [9] Beyond fuel efficiency measures through propulsion technologies, aerodynamic aircraft shapes, lightweight materials – to reduce emissions:

What are tangible paths to SAF – Sustainable Aviation Fuels? 

Michael Schultz: Three pathways have emerged as the most developed to date. The first is a route called HEFA (Hydroprocessed Esters and Fatty Acids), also known as HVO (hydrotreated vegetable oil). This is a fancy way of saying that oils and fats from plants and animals go through a hydroprocessing step (similar to a typical oil refinery operation) and downstream conversion to produce sustainable aviation fuel.

Alcohol to Jet (ATJ) is a promising route, in which alcohol produced from waste industrial gas or fermentation of components from corn or sugar cane is converted to sustainable aviation fuel.

A third route uses gasification of municipal solid waste or biomass to produce synthesis gas (a mixture of hydrogen and carbon monoxide), followed by an established process known as Fischer Tropsche to convert the synthesis gas to sustainable aviation fuel.

Other emerging routes, although earlier stage, include high temperature/high pressure conversion of feedstocks such as algae, fats, and oils, and electrochemical conversion of CO2 into carbon monoxide, followed by the Fischer-Tropsch process. [10]

Sebatian Klemm: Sustainable aviation fuels are a critical part to sustainably transform the transportation system to post-fossil fuel mobility. Decarbonization efforts however do not end with sustainable technologies, as even with renewable energy sources more excessive use may lead to unsustainable rebound effects. – As Matthias Schuler of Transsolar put it in regard of his work on the Masdar City project: “We told the builder from the very beginning that Masdar cannot be made into a CO2-neutral city with technology alone. The concept only works if people’s attitudes and habits change. This may mean lowering our demands.” [11]

What connections do you draw between sustainable fuels, transportation, mobility, and the principle of sufficiency?

Michael Schultz: This is a challenge. I think in many ways we are playing a dangerous game. The immediate challenges of global warming and the impact of CO2 are, in my view, widely accepted. I am not terribly concerned with climate change deniers, as I believe these to be a small (although sometimes vocal) minority.

What is more concerning is the attitude We need sustainable solutions, but they can’t cost more, or We can’t give up the lifestyles we have become accustomed to. I don’t think that market forces alone will do the trick. I don’t think we have a chance to meet the aggressive climate targets, if we continue to dump a pollutant, CO2, into the atmosphere without any economic penalty as we can never compete with the status quo.

I think of analogies in the US, where banning lead in gasoline, sulfur in industrial emissions – leading to smog and acid rain – and dumping hydrocarbons into water ways – leading to lakes and rivers catching fire on a regular basis – was only accomplished through government intervention. – Industry came up with good, technical solutions to these problems, but only when pushed to do so.

In some ways we also need to learn to live differently.  In the last couple of years we have learned that we can work remotely, reducing the need to commute to the office on a daily basis, and the need for frequent air travel to meet clients or attend conferences. This will have a positive benefit going forward. 

Links:

·       Register here for “Paths to Sustainable Fuels” synergy event with Dr. Michael Schultz on 31 May.

·       Contact Dr. Michael Schultz with your professional interest in Sustainable Fuels.

References

↑1, ↑11          archplus: “Post-Oil City – The History of the City’s Future”, English Version, p.17, ISBN 978-3-931435-18-9 https://archplus.net/de/POC-EN/                       accompanying the exhibition Post-Oil City

↑2                 FAO: Water–energy–food nexus

↑3                 Statista: Global oil demand 2006-2026

↑4                 RFA: Ethanol Biorefinery Locations Map

↑5                 German Energy Agency (dena): Fuels & technologies

↑6                 Synthetic_fuel – Wikipedia

↑7                 Biofuel – Wikipedia

↑8                 https://www.ptisolns.com/mike-schultz

↑9                 Drawdown, edited by Paul Hawken, Penguin Books 2017, p.150                                           https://www.drawdown.org/the-book

↑10               Fischer–Tropsch process – Wikipedia

Sustainable Technology Separations

Separations are the underappreciated workhorse of the refining, petrochemical and specialty chemicals industries.  This covers everything from crude towers used to separate crude oil into fractions for various refining technologies, filtration and centrifugation used to recover crystallized products in specialty chemicals, and distillation used for product recovery in most products that we use every day.

In 2016, Nature published an article titled ‘Seven chemical separations to change the world’. The seven identified included: 

1)      hydrocarbons from crude oil

2)      uranium from seawater

3)      alkenes from alkanes

4)      greenhouse gases from emissions

5)      rare-earth metals from ores

6)      benzene derivatives

7)      trace contaminants from water

This list covers both improvements to existing separations (1, 3, 6) and new separation needs for a more sustainable future (2, 4, 5, 7). Let’s look at three areas where advances in separation technology will be critical to get to a sustainable, low carbon future:

·       Separations to enable new chemical, biological, or electrochemical technology

·       The separation IS the novel technology

·       Energy efficiency—boring, but effective

Separations to enable novel reactor technology:    Separations are important for advancing sustainable technology because new technologies introduce new separation challenges, such as recovery of intracellular products from microbes, often referred to as Downstream Processing (DSP), separation and purification of bio-oil fractions produced from pyrolysis of waste plastic or biomass, or gas separations from electrolytic reduction of CO2. 

While these separation problems are new, the solutions will likely rely on conventional unit operations like membranes, solvents, solid sorbents, and distillation.

When developing a new technology, it is important to think about the separations from the start.  The figure below that shows that by integrating these steps early in technology development, we can develop a more optimized flow scheme. It is sometimes tempting to focus exclusively during early-stage R&D on maximizing yield or conversion in the reaction. This is a mistake. While it is important to understand the conditions needed to maximize yield or conversion, this is rarely the optimal overall condition. Perhaps high conversion generates more byproducts, reducing yield and increasing downstream separation costs.  Perhaps we need higher pressure or temperatures to achieve that high conversion, which may create additional downstream costs.  We can avoid surprises by integrating the separation system early in technology development and evaluating reaction/separation tradeoffs.

The Separation IS The Technology

Removal of CO2 from air seems crazy, and probably is. Any ‘smart’ engineer will tell you that trying to recover a gaseous component at a 400 ppm concentration from a stagnant gas at ambient pressure is a fool’s errand, but that’s what we are trying to do.  As a newbie at (pre-Honeywell) UOP we were fortunate to have a visit from Nobel Laureate George Olah, when he spoke about his ideas around a methanol economy which included CO2 recovery from the air. A few of us sat around afterward pooh-poohing the silly academic who thought this was a good idea, because there was no way this could be done economically.  Well, here we are nearly 25 years later, and a number of companies are trying to do just that, with billions of $ in investment flowing into this space.  I think we have no choice but to pursue this route, which in addition dramatically reducing the amount of CO2 that flows into the atmosphere in the first place.  A number of creative companies are exploring ways to do this with various solid sorbents or liquid solvents, innovating in ways that didn’t seem possible decades ago. 

Other interesting activities where the separation is the technology involve lithium recovery from brine or seawater for battery technology, and metal organic framework (MOFs) reaching maturity as advanced sorbents for a number of applications.

Energy Efficiency—Boring, but effective

Separations require energy input, usually using heat, pressure, or mechanical energy to drive the separation and often have a yield loss. So one way to improve sustainability of technology is to improve the separation and reduce energy demand of existing separations technology.  This can include:

·       Heat pumps/mechanical vapor recompression to improve the energy efficiency of distillation columns

·       Dividing wall distillation columns (DWCs) to replace multiple columns and reduce energy requirements

·       Membrane systems as pre/post separations to support existing distillation systems

Often, we are trading off additional capital to reduce operating cost, but also save energy and along with it reduce CO2 emissions associated with those energy sources. The growing availability of cheap, renewable electricity can open up new opportunities that may not have made sense in the past. 

Some guidelines when considering separations for sustainable technology:

·       Don’t forget about the separation.  Integration and optimization of the separation system with the reactor systems is important to achieving commercial success.

·       Don’t reinvent the wheel.  Often, we can use existing technology, perhaps with some modification, to accomplish the separation we need.  This is often a quicker and cheaper way to scale up.

·       Don’t forget about energy efficiency.  Typically low hanging fruit--may require some upfront capital with the benefits of lower operating costs and a significant reduction in CO2 emitting fuel sources.

Models Should Be Useful, Not Perfect!

The previous articles in this series presented ideas related to starting with a good Process Concept to drive the scale-up effort (‘Start with the Process Concept’), with Creative Process Engineering serving as one key aspect to this approach. 

We draw on Modeling and Analysis as a second key element: to set targets for economic and sustainability performance, encapsulate experimental data into engineering models, and design process equipment.  However, it is critical to recognize the limitations of models. British statistician George Box liked to say that all models are wrong, but some are useful[i].   For our purposes, models should be useful tools to support process development, scale-up, and design, rather than exact replications of the system in question.  To carry the analogy further, we need an entire toolbox at our disposal, and to make sure that we have the right tools for the right job. 

I typically like to start off with something simple and build out detail from there.  A simple mass balance using a spreadsheet is a great place to start!  We can then add additional detail to this simple model, and develop additional types of models depending on the requirements.  Examples of additional types of useful models include: 

·       Kinetic models for chemical and biological reaction systems.

·       Reactor design models for common reactor types, such as packed bed, trickle flow, fluidized bed, and external loop. 

·       Phase equilibrium models to support design of separation systems 

·       Life Cycle Analysis models for sustainability analysis. 

·       Technoeconomic models for economic analysis. 

·       Process simulation models for flowsheet and equipment design. 

The level of detail needed is driven by the requirements of the task at hand.

Where data does not exist, or is inconclusive, assumptions can be used to establish a working model.  We can then evaluate how critical those assumptions are to the system in question by exploring sensitivities.  If the answer is ‘very critical’, this result can be used to inform upcoming experimental activities.   This interplay between engineering design, modeling, and experimentation is quite important.  When modeling is done in a vacuum, with little or no interaction with experimentalists, the results is often a very beautiful model with limited value.  Similarly, some experimentalists insist it is impossible to model their system and find no value in the results that are spit out by an egghead running a spreadsheet.   The reality is that a useful model can, and should, complement experimentation to reduce the time and cost of scale-up, providing insight as to when additional data is needed to enhance understanding. A great model can also produce results and understanding that may be too time consuming, costly, or just not possible through additional experimentation. The models can also direct future opportunities for experimental programs. 

The models should then be refined as more data is collected—this is not ‘set and forget’.  This data should be generated at multiple scales to enhance the robustness and utility of the model.   The final article in this series will dive deeper into this critical issue of experimental data. 

[i] Box, G. E. P. (1979), "Robustness in the strategy of scientific model building", in Launer, R. L.; Wilkinson, G. N., Robustness in Statistics, Academic Press, pp. 201–236.

Creative Process Engineering

In my introductory article on this topic (Practical Technology Scaleup) I wrote about the benefit of drawing on Creative Process Engineering, Modeling & Analysis, and Experimental Data to develop a solid Process Concept to drive the scale-up effort--reducing risk and optimizing the economics of a sustainable technology.  

Creative Engineering, like Creative Accounting, may be an oxymoron or have negative connotations, but in my experience, it is critical for first of its kind technology.  Creative process engineers understand commercial plant design and can also deal with the ambiguity that is common with any new technology.  This creativity enables the engineers working closely with the science experts to develop the process concept, establish the material balance, and make key process design decisions to set the framework for the evolving novel technology.  These decisions fall into categories such as:

·       Product Requirements.  Product quality.  Waste vs Byproduct.  Batch vs Continuous.

·       Catalyst:  Composition.  Biological vs Thermochemical.  Size/shape.  Heterogenous vs Homogenous. 

·       Major Unit Operations.  Reactor concept.   Feedstock processing.  Separation processes.

·       Major Equipment.  Standard or Custom.  Pump/Exchanger/Compressor type.

·       Design Conditions.  Temperature.  Pressure.  Product Specifications. 

The challenge of translating discoveries from the lab into viable process flowsheets has been described by Douglas[i] to require assumptions 1) that fix parts of the process flowsheet 2) that fix some of the design variables and 3) that fix the connections to the environment.  Douglas estimates that more than one million process flowsheets can be generated just from the varied assumptions associated with the first process flowsheet.   Clearly it is not feasible to evaluate all of these alternatives. The good news is that we can just as quickly reduce the number of alternatives to a more manageable number but need good engineering judgement to make decisions with relatively little information.  This is where the Creative aspect of Process Engineering is critical. 

In practicality I find it is best to identify the reactor concept and separation scheme that are the best options, and then build the flowscheme around these.  Often, this is a case of screening out the ‘bad options’ resulting in several process concepts that make sense.  We can then define the data needed by Experimentation and Modeling & Analysis to refine our choices to the best option.  These areas will be explored in future articles. 

[i] Douglas, J.M. “A Hierarchical Decision Procedure for Process Synthesis”, AIChE Journal, March 1985, Vol. 31. No 3, pp 353-362. 

Practical Technology Scaleup

The Key to Launching Sustainable Technology

We are in the midst of a global crisis with the need to reduce carbon across all industries in order to limit global warming to 1.5 deg C above pre-industrial levels, as established in The Paris Agreement[1].  This drives a need for breakthrough technologies across all industries that can both reduce carbon and create value.  We can draw on past experience to reduce the time, cost and risk of technology scaleup, through some guidelines and practices that are the key to Practical Technology Scaleup.   This increases the chance of success for individual technologies and will enable us as a society to meet these aggressive climate targets. 

I have had the chance to scale-up and launch new products and technologies across a range of industries including sustainable fuels, renewable chemicals, bioprocessing, petrochemicals, specialty chemicals, distillation, and catalysis, and in my 23 years of industrial experience have developed a series of rules and guidelines to scaling and launching new technology.  The challenge with each has been to:

·       reduce technology risk

·       reduce time to market

·       reduce cost

·       maximize value

These are often competing objectives, and usually reducing time to market and reducing risk win out.  Of course, if the capital and operating cost are too high then we will not be successful, so we cannot ignore these criteria either.   

It is critical to ‘start with the end in mind’ using a Technology Concept (or Process Concept) that is used as a framework to drive new technology development, scale-up and commercialization.  This technology concept is not set in stone, and, in fact, should be reviewed and updated as we progress throughout the scale-up effort.  We establish the technology concept to drive the scale-up effort, not just inform it. This then enables us to direct the innovation to create the greatest value from breakthrough and disruptive ideas, as we identify challenges early, fail fast when it is cheaper and quicker, and make sure our efforts are focused on solving commercially relevant problems.

The technology concept is developed, and iteratively revised, through a combination of Creative Process Engineering, Multi-scale Experimental Data, and Modeling and Analysis. 

Creative Process Engineering:  The flow scheme is developed, the material balance is estimated, and key process design decisions are identified so that we can establish the best process flowsheet for the technology.  

Modeling & Analysis:  A good model can save time and $$ in the lab.  Coupled with the right analysis, this can be used to prioritize objectives in the lab, pilot, and demo units.   Cautionary note--useful models are more important than perfect models!

Experimental Data:  We need the right data to prove out breakthrough ideas, secure partners and investors, and develop engineering data for equipment design.  Mutli-scale data is critical to this effort, and with good planning, multiple assets and external resources can be leveraged.

The key benefits to this approach are:

•               Prioritization of R&D to de-risk and optimize a new technology.

•               Identification of cost reduction opportunities throughout the scale-up effort.

•               Anticipation of engineering needs as early as possible. 

In this way we can reduce risk and optimize economics of our new design, while efficiently managing the time and cost of our efforts.

In future posts I will elaborate on the key concepts presented in this introduction. 

[1] https://unfccc.int/process-and-meetings/the-paris-agreement/the-paris-agreement